Instructions
Saddle-mount unit GSG-S-VM
53 - 72
010710-03-EN BA GSG-S-VM / 13.07.2020
25. GSG-S-VM cleaning after use
The cleaning of the machine should be done on an untreated sur-
face on the field. Cleaning should be done with a spraying gun,
which is supplied by water out of the freshwater tank.
•
After use, the
GSG-S-VM
must be cleaned thoroughly inside and
outside using plenty of water; sodium carbonate can be added
for better results.
•
For the cleaning process itself, move the fan units to the closest
position and switch on the pump, nozzles and suction unit.
•
To clean the pump, fittings and hoses, fill the freshwater tank
with water and operate the pump for a short period. All fittings
should be actuated several times in order to ensure thorough
cleaning.
Take special care in cleaning nozzles and filters; it may even be
necessary to disassemble these parts to check for wear or dam-
age. Replace worn or damaged parts.
Note:
When spraying the outside of the
GSG-S-VM
with water, please
note that the control box is only protected against splashing wa-
ter; never subject it to direct water spray or weather.
When spraying the machine, also retract all hydraulic cylinders in
order to prevent corrosion on the piston rods.
•
The volume of surplus liquid
returned from the tunnel collec-
tor can be adjusted via the re-
cycling valve on the main valve
block. (Fig. 31)
Fig. 31
Summary of Contents for GSG-S-VM
Page 2: ...Instructions Saddle mount unit GSG S VM 2 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 30: ...Instructions Saddle mount unit GSG S VM 30 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 70: ...Instructions Saddle mount unit GSG S VM 70 72 010710 03 EN BA GSG S VM 13 07 2020 34 Notices...
Page 72: ...72 72 Design mail bauer ib com...
