![background image](http://html1.mh-extra.com/html/lipco/gsg-s-vm/gsg-s-vm_translation-of-the-original-instructions_1926987027.webp)
Instructions
Saddle-mount unit GSG-S-VM
27 - 72
010710-03-EN BA GSG-S-VM / 13.07.2020
17. Operating the GSG-NV-VM
•
Note:
Do not use plant protection agents that tend to gum up or con-
geal
– they have a negative effect on spraying.
17.1. Determining the amount of spray liquid needed
The amount of spray liquid needed, which depends on the re-
spective culture, the type of plant protection and the effective-
ness of the plant protection agent, can be found in the instruc-
tions for the plant protection agent.
•
The working width (in meters) corresponds to the row width per
tunnel.
•
The approximate driving speed (km/h) can be read from the
speedometer of the towing vehicle.
In order to take into account any slippage in the drive wheels,
this should be checked directly on the field.
A driving speed of 5 to 7 km/h is recommended for spraying.
17.2. Checking the driving speed
•
Mark off a path with a length of 100 m.
•
Select a gear and engine speed to achieve the desired speed.
•
Drive the marked distance and record the time needed.
•
Calculate the driving speed or use the conversion table.
•
Adapt the RPM, if necessary, and repeat the procedure until the
desired driving speed has been attained. Record the results in
writing.
Summary of Contents for GSG-S-VM
Page 2: ...Instructions Saddle mount unit GSG S VM 2 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 30: ...Instructions Saddle mount unit GSG S VM 30 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 70: ...Instructions Saddle mount unit GSG S VM 70 72 010710 03 EN BA GSG S VM 13 07 2020 34 Notices...
Page 72: ...72 72 Design mail bauer ib com...