![background image](http://html1.mh-extra.com/html/lipco/gsg-s-vm/gsg-s-vm_translation-of-the-original-instructions_1926987058.webp)
Instructions
Saddle-mount unit GSG-S-VM
58 - 72
010710-03-EN BA GSG-S-VM / 13.07.2020
Air chamber check:
Air chamber pressure control
valve (Fig. 39)
•
Set the pressure of the air
chamber to approx. 20% of the
spraying pressure (approx. 2
–
2.5 bar) and check occasional-
ly.
Fig. 39
Pump safety control valve:
Safety button
•
If the pump safety control valve
is activated for any reason,
then push the safety button all
the way in after eliminating the
cause. (Fig. 40)
Fig. 40
•
Check all hydraulic connections, chains, springs and spray hose
connections regularly to ensure that they are tight.
Before opening or releasing pressurized parts (valves, hoses,
etc.), they must be de-pressurized.
•
Note:
Nozzles and other parts that contact spray liquid should never be
blown out with the mouth.
After working on pressurized parts, always check the seals in the
pressure circuit before operating the system with plant protection
agents.
•
Clean all filters.
Summary of Contents for GSG-S-VM
Page 2: ...Instructions Saddle mount unit GSG S VM 2 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 30: ...Instructions Saddle mount unit GSG S VM 30 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 70: ...Instructions Saddle mount unit GSG S VM 70 72 010710 03 EN BA GSG S VM 13 07 2020 34 Notices...
Page 72: ...72 72 Design mail bauer ib com...