Turn page over
to finish the rest
of the assembly
Steps 13 to 14
for the buckle
replacement.
www.gracobaby.com
To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
2
4
Slide old buckle
assembly off of
harness straps as
shown.
9
Using flat head screw
driver take waist strap
bars out of mounts.
Remove bars from
straps and set aside.
Replace waist
strap bars.
Slide NEW buckle
onto harness straps.
MAKE sure not to
twist straps.
Re-insert straps
through slots in seat
pad and seat back.
To loosen straps, lift lever
and pull harness straps.
SnugRide® Click Connect™ 35LX/40
Buckle Replacement Guide
©2014 Graco PD265299C 2/14
Push bars back into
mounts using flat
head screw driver.
1
5
7
8
3
Pull waist straps through
seat bottom and seat
pad as shown.
Reach under seat to the
metal retainer. Push the
retainer up through bottom
of seat and remove buckle
and discard.
6
Insert waist straps
back through seat
pad and seat bottom
slots.
10
11
12
Insert metal
retainer from
NEW buckle into
crotch slot in the
seat pad and
seat bottom as
shown.
Top View
Bottom View
Bottom View
