Instructions
Saddle-mount unit GSG-S-VM
3 - 72
010710-03-EN BA GSG-S-VM / 13.07.2020
1. Introduction
Dear Customer:
Thank you for choosing a
LIPCO Saddle-mount unit GSG-S-VM
. We
are confident that you will be satisfied with our product.
In order to achieve maximum performance from your new
LIPCO
Saddle-mount unit GSG-S-VM
over an extended period, please fol-
low the instructions in this operating manual closely. This will help
you to prevent any damage and to prevent accidents that could re-
sult from failure to comply with the manual and for which
LIPCO
can
assume no liability.
This operating instruction is an essential component of the machine
and therefore must always be included when the machine is sold, al-
so if it is sold to third parties.
By carefully storing the operating manual in a safe place, both you
and the operator will have a comprehensive reference work at hand.
Note:
The illustrations, descriptions and data contained in these instruc-
tions are not binding.
LIPCO
reserves the right to make changes at
any time, without prior notice.
This manual applies only to the
LIPCO Saddle-mount unit GSG-S-
VM
and does not replace the operating instructions for components,
built-in by the customer.
For specific points (like maintenance etc., ) concerning the BRAUD-/
Gregoire- or Pellenc harvester , please refer to the instructions of the
adequate harvester supplier.
Summary of Contents for GSG-S-VM
Page 2: ...Instructions Saddle mount unit GSG S VM 2 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 30: ...Instructions Saddle mount unit GSG S VM 30 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 70: ...Instructions Saddle mount unit GSG S VM 70 72 010710 03 EN BA GSG S VM 13 07 2020 34 Notices...
Page 72: ...72 72 Design mail bauer ib com...