Linn Sondek CD12, Manual

Page: 63 / 70

23
Problem Explanation Suggestion
Receiving equipment The infra-red signal may be Try replacing its batteries.
does not respond to getting distorted by low
any learnt commands, battery power in the Hi-Fi
or the response is Personal Handset.
intermittent
Receiving equipment may have Try aiming the Hi-Fi Personal
a “blind spot” to the infra-red Handset straight at the infra-red
transmitted by the Hi-Fi receiver in your equipment.
Personal Handset.
One of the commands may Try finding the command
have incorrectly updated the responsible for affecting the other
timing information during the commands. To do this, restart the
learning process. learning process by clearing the
source to learn new commands. As
you learn each command, test the
response of the receiving
equipment before learning the next
command. The last command learnt
when the equipment stopped
responding will be the command at
fault.
Now restart the learning process
by clearing the source to learn new
commands. Learn the commands in
a different order, using the
command at fault as the first
command.
Receiving equipment Additional timing information Re-learn the non-operational
does not respond to may be required for the commands without erasing the
some learnt commands non-functioning commands. previously learnt commands.
The non-operational commands Restart the learning process,
may require additional timing
ensuring you clear the source
information that is not to learn new commands. Learn the
compatible with the timing commands in a different order,
information of the operational using one of the non-operational
commands.
commands as the first command.