Linn Sondek CD12, Manual

Page: 34 / 70

30
RS232-C software upload port
Connector RJ-11.
Fully electrically isolated from audio circuitry.
Remote input
Current loop remote control input.
Connector High-quality RCA phono.
Sensitivity 5mA differential signal current.
Remote output
Current loop remote control output.
Connector High-quality RCA phono.
Level 6mA output signal current.
Opto isolated current loop output to interface with
Linn KNEKT system.
Outputs
2 pairs unbalanced stereo analogue audio outputs
Connector High-quality RCA phono.
Output level 2V rms (peak code).
Output impedance 200 .
Minimum load 1k .
1 pair balanced (differential) stereo analogue audio outputs
Connector 3-pin XLR per channel (pin1 – shield,
pin2 – hot, pin3 – cold).
Output level 4V rms between hot and cold (peak
code), 2V rms between hot and shield
and cold and shield.
Output impedance 300 each (hot and cold).
Minimum load 600 .