70
Trigger by Input
Select the input port, when the input port meets the trigger
condition, the output port will be triggered (The Port level time
change, By < Output Duration > control)
Trigger By Call
state
Select call state to trigger the output port, options are:
Talking: When the device’s talking status changes, trigger the
output port.
Ringing: When the device’s ringing status changes, trigger the
output port.
Calling: When the device’s calling status changes, trigger the
output port.
Trigger By DssKey
Enable or disable trigger by dsskey. If any of the dsskey is
selected, when the dsskey application performs, the output port
will be triggered.
Triggered Hangup
Trigger the output port after hanging up
Hangup Delay
Hang up trigger delay, default 5 seconds
Motion detection settings
Motion Detection
Alarm
Enable or disable motion detection
Trigger Duration
Set the trigger delay time, the default is 3 seconds, the range:
0~3600 seconds
Trigger ringtone
Support ringtone selection
Trigger behavior:
Send SMS
Enable or disable the input port to send messages to the server
Function key
When set to dsskey1 or dsskey2, trigger dsskey to make a call,
the default is none
Tamper Alarm Settings
Enable Tamper
Alarm
Whether to enable tamper detection, if the terminal is violently
dismantled, the tamper is triggered and always play the set alarm
ringtone
Alarm command
When detected someone tampering the equipment, the alarm
signal will be sent to the corresponding server
Reset command
When the equipment receives the command of reset from server,
the equipment will stop alarm
Alarm Ringtone
Alarm ringtone setting
Detachable alarm reset
Reset alarm state
Reset the play of stop ringtone
