18
Picture 18 - MCAST
Table 9 - MCAST
Parameters
Description
Enable Auto Mcast
Send the multicast configuration information by Sip Notify
signaling, and the device will configure the information to the
system for multicast listening or cancel the multicast listening
in the system after receiving the information
Auto Mcast Timeout
Delete Time
When a multicast call does not end normally, but for some
reason the device can no longer receive a multicast RTP
packet, this configuration cancels the listening after a
specified time
SIP Priority
Defines the priority in the current call, with 1 being the highest
priority and 10 the lowest.
Intercom Priority
Compared with multicast and SIP priority, high priority is
pluggable and low priority is rejected
Enable Page Priority
Regardless of which of the two multicast groups is called in
first, the device will receive the higher priority multicast first.
Enable Mcast Tone
When enabled, play the prompt sound when receiving
multicast
Name
Listened multicast server name
Host:port
Listened multicast server’s multicast IP address and port.
Multicast
：
Go to web page of [
Function Key
] >> [
Function Key
], select the type to
multicast, set the multicast address, and select the codec.
Click Apply.
Set up the name, host and port of the receiving multicast on the web page of
