17
8
Advance Function
8.1
Intercom
The equipment can answer intercom calls automatically.
Picture 17 - WEB Intercom
Table 8 - Intercom
Parameters
Description
Enable Intercom
When the intercom system is enabled, the device will
accept the SIP header call-info of the Call request
Command automatic call
Enable Intercom Barge
If the option is enabled, device will answer the intercom
call automatically while it is in a normal call, and it will
reject new intercom call if there is already one intercome
call
Enable Intercom Mute
Enable mute during intercom mode
Enable Intercom Ringing
If the incoming call is intercom call, the device plays the
intercom tone.
8.2
MCAST
This feature allows user to make some kind of broadcast call to people who are in
multicast group. User can configure a multicast DSS Key on the phone, which allows user
to send a Real Time Transport Protocol (RTP) stream to the pre-configured multicast
address without involving SIP signaling. You can also configure the phone to receive an
RTP stream from pre-configured multicast listening address without involving SIP
signaling. You can specify up to 10 multicast listening addresses.
