68
Picture 59 - Security Settings
Table 33 - Security Settings
Security Settings
Parameters
Description
Basic Settings
Ringtone Duration
Set the ringtone duration, default value is 2 seconds.
Input & Tamper
Server Address
Set remote server address. The device will send message to the
server when the alarm is triggered. The message format is
：
Alarm_Info:Description=i16SV;SIP
User=;Mac=0c:38:3e:3a:06:65;IP=; port=Input .
Information
Fill in the information attached to the upload server
Input settings
Input
Enable or disable Input
Triggered by
When choosing the low level trigger (closed trigger), detect the
input port (low level) closed trigger.
When choosing the high level trigger (disconnect trigger), detect
the input port (high level) disconnected trigger.
Input Duration
Set the Input change duration time, the default is 5 seconds.
Triggered Action
Send SMS:
Set the alert message send to server if selected.
Event:
The device will perform corresponding Dss Key
configurations if any key is selected, by default the value is none.
Triggered Ringtone:
Select triggered ring tone.
Triggered Ringtone Ringtone selection
Output Settings
