10
Touch and hold the speed-dial button for 3 seconds, wait for the speaker to beep, press
the speed-dial button three times within 5 seconds, and the system will automatically
announce the IP address by voice after successfully switching to the network mode.
Table 7 - Configuration instructions
Default configuration
DHCP mode
Default enable
Static IP
192.168.1.128
Voice read IP address
Touch and hold the speed-dial
button for 3 seconds, press the
speed dial button one times within 5
seconds
Server port
80
6.4
WEB configuration
When the device and your computer are successfully connected to the network, enter
the IP address of the device on the browser as http://xxx.xxx.xxx.xxx/ and you can see the
login interface of the web page management.
Picture 7 - WEB Login
The username and password should be correct to log in to the web page.
The default
username and password are "admin"
. For the specific details of the operation of the
web page, please refer to
6.5
SIP Configurations
At least one SIP line should be configured properly to enable the telephony service. The
line configuration is like a virtualized SIM card. Just like a SIM card on a mobile phone, it
stores the service provider and the account information used for registration and
authentication. When the device is applied with the configuration, it will register the device
to the service provider with the server’s address and user’s authentication as stored in the
configurations.
The SIP line configuration should be set via the WEB configuration page by entering the
