LINKVIL i61 User Manual Download Page 66

Page: 66 / 87

Picture 47 - Tone

9.28

Intercom settings >> Led

The user can configure the status and color of the indicator light on this page.

Picture 48 - Led

Status indicator:

The user can customize how the LED displays when the device is in

different status.

Energy-saving mode:

The device automatically turns off the LED when the device is not

in use. The user can turn on or off the energy-saving mode.

Energy-saving mode timeout:

The user can set the timeout of the energy-saving mode

after inactivity. The default timeout is 60 seconds.

9.29

Call list >> Call List



Restricted Incoming Calls

It same as blacklist.By adding a number into the blacklist, user will no longer receive

phone call from that number and it will be rejected automatically by the device until user
delete it from the blacklist.

Summary of Contents for i61
























































































Search results

Summary of Contents for i61

Reviews:

Related manuals for i61

Brands by name

Popular brands

LINKVIL i61, User Manual

Search results

Summary of Contents for i61

Reviews:

Related manuals for i61

Brands by name

Popular brands