46
Outgoing List
Enable country
Code
Wether enable country Code
Country Code
Country Code
Area Code
Area Code
Allow IP Call
If enabled, user can dial out with IP address
P2P IP Prefix
You can set IP call prefix,for example,i set it as “172.16.2.”,then i
input #160 in dialpad and press dial key ,it will call 172.16.2.160
automatically
Restrict Active URI
Source IP
Set the device to accept Active URI command from specific IP
address.
Push XML Server
Configure the Push XML Server, when phone receives request, it
will determine whether to display corresponding content on the
phone which sent by the specified server or not.
Line Display Format Line display format including SIPn/SIPn
：
xxx/xxx@SIPn
Call Number Filter
Configure a special character & ,if the number is 78 & 9. The call
will be filtered out&
Auto Resume
Current
If the current path changes, the hold will be automatically resume
Limit Talking
Duration
Automatically hang up the call after enabling the time set for the
call
Talking Duration
Call duration ,20-600s
No Answer Auto
HangUp Timeout
If the call is not answered, the call will be automatically hung up
after the timeout
Enable Push XML
Auth
To enable push xml auth, user password is required
Ringing timeout
If the call is not answered, automatic hang-up after timeout
Show
description
information
Show description information on the IP scan tool software.
Default is "IP Video Doorphone"
Tone Settings
Enable
Holding
Tone
When turned on, a tone plays when the call is held
Enable Call Waiting
Tone
When turned on, a tone plays when call waiting
Play Dialing DTMF
Tone
Play DTMF tone on the device when user pressed a phone digit
at dialing, default enabled.
Play Talking DTMF
Tone
Play DTMF tone on the device when user pressed a phone digits
during taking, default enabled.
Auto-answer beep
When switched on, a beep will be heard when the auto-answer is
activated.
Tone
of o
pen door
success
fully
Closed: No prompt tone is played after the door is opened
successfully
