42
Chapter 7: Configuring the Router’s Web-Based Utility
Security
Dual-Band Wireless Access Point
Other Options
•
Unauthorizes IP Blocking. Click
Enabled
to block unauthorized IP addresses. Enter in the Rejects Number
field to specify how many times IKE must fail before blocking that unauthorized IP address. Enter the length of
time that you specify (in seconds) in the Block Period field.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes. For further help on this tab, click the Help button.
Security
802.1x
•
Radius Server IP Address. Enter the Radius Server IP Address in the fields.
•
Radius Server Port. Enter the Radius Server Port in the field.
•
Shared Secret. Enter the Shared Secret in the field.
•
Authentication Type. To enable EAP-TLS, click EAP-TLS. To enable EAP-TTLS, click EAP-TTLS. To enable EAP-
MD5, click EAP-MD5,. To disable authentication, click Disable.
•
WEP Settings. Click the
WEP Settings
button to edit the settings and Figure 7-21 will appear.
•
Dynamic WEP Key Length. Select
64
or
128
bits from the drop-down menu.
•
Key Renewal Timeout. Enter the time in seconds for key renewal.
•
Port Inactivity Timeout. Enter the time in seconds for port inactivity.
•
Port Connectivity Timeout. Enter the time in seconds for port connectivity.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes.
WEP
The WEP screen allows you to configure your WEP settings. WEP encryption should always be enabled to
increase the security of your wireless network. Default Transmit Key. Select which WEP key (1-4) will be used
when the Router sends data. Make sure that the receiving device is using the same key.
Figure 7-20:
