45
Chapter 7: Configuring the Router’s Web-Based Utility
Applications and Gaming
Dual-Band Wireless Access Point
Applications and Gaming
Port Range Forwarding
The Port Forwarding screen sets up public services on your network, such as web servers, ftp servers, e-mail
servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use
Internet access to perform functions such as videoconferencing or online gaming. Some Internet applications
may not require any forwarding.)
When users send this type of request to your network via the Internet, the Router will forward those requests to
the appropriate PC. Any PC whose port is being forwarded must have its DHCP client function disabled and must
have a new static IP address assigned to it because its IP address may change when using the DHCP function.
•
Application. Enter the name you wish to give each application.
•
Start and End. Enter the starting and ending numbers of the port you wish to forward.
•
Protocol. Select the type of protocol you wish to use for each application:
TCP
,
UDP
, or
Both
.
•
IP Address. Enter the IP Address and Click
Enabled
.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes.
Port Triggering
Port Triggering is used for special Internet applications whose outgoing ports differ from the incoming ports. For
this feature, the Router will watch outgoing data for specific port numbers. The Router will remember the IP
address of the computer that sends a transmission requesting data, so that when the requested data returns
through the Router, the data is pulled back to the proper computer by way of IP address and port mapping rules.
•
Application. Enter the name you wish to give each application.
•
Start Port and End Port. Enter the starting and ending Triggered range numbers and the Forwarded Range
numbers of the port you wish to forward.
•
Protocol. Select the type of protocol you wish to use for each application:
TCP
,
UDP
, or
Both
.
•
Click
Enabled
.
Figure 7-26:
Figure 7-27:
