52
Chapter 7: Configuring the Router’s Web-Based Utility
Factory Default
Dual-Band Wireless Access Point
Factory Default
If you have exhausted all other options and wish to restore the Router to its factory default settings and lose all
your settings, click
Yes
.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes.
Firmware Upgrade
To upgrade the Router’s firmware:
1. Click the
Browse
button to find the firmware upgrade file that you downloaded from the Linksys website and
then extracted.
2. Double-click the firmware file you downloaded and extracted. Click the
Upgrade
button, and follow the
instructions there.
Figure 7-34:
Figure 7-33:
