manualshive.com logo in svg

Lincoln Electric LINC-CUT AS-CM-LCS1020WF125, Instruction Manual, Page: 38 / 70

Share
Download
Lincoln Electric LINC-CUT AS-CM-LCS1020WF125 Instruction Manual Download Page 38

LINC-CUT

®

 S 1020w-1530w

34

Plate Setup:

 

Press PLATE SETUP. Use the movement keys in PLATE SETUP to move 

the torch body to the lower left-hand corner of the plate to cut.

Press SET PLATE ORIGIN. That sets the PROGRAM ZERO or the 

absolute coordinates (X= 0: Y=0) of the program.

Press CLOSE.

At the bottom of the screen, switch to DRY RUN mode. Press RUN JOB. 

That will “simulate” the loaded program without activating the plasma torch.

If you are satisfied with the dry run and machine movements, switch from 

the DRY RUN to the ACTIVE RUN mode to start the cut according to the 

loaded program.

Press RUN JOB.

If you believe the machine is moving too fast for the material, you can 

modify the feed speed using the FEED RATE OVERRIDE% scroll bar.

By default, the cursor is set to 100 %. To slow down based on the 

percentage, move the cursor to the left. To speed up the feed, slide it above 

100 %.

Summary of Contents for LINC-CUT AS-CM-LCS1020WF125







































































Reviews:

No comments