manualshive.com logo in svg

Lincoln Electric LINC-CUT AS-CM-LCS1020WF125, Instruction Manual, Page: 32 / 70

Share
Download
Lincoln Electric LINC-CUT AS-CM-LCS1020WF125 Instruction Manual Download Page 32

LINC-CUT

®

 S 1020w-1530w

28

AVHC MODE is a switch between the MANUAL and 

AUTO modes

.

•  Manual

 - The torch will remain at the cut height 

established every time the material is pierced.  That 

will not automatically adjust the cut height during 

cutting.

•  Auto

 - The torch will maintain the distance entered in 

CUT HEIGHT and the material profile, based on the 

SET VOLTAGE and CURRENT VOLTAGE displayed 

on the plasma power source.

AVHC (Arc Voltage Height Control) hosts how the controller manages the tool holder. The dashboard provides 

the operator with an overview of the head position and other status indicators.

AVHC (Automatic Voltage Height Control):

Cut Parameters may be switched between pre-defined 

program and user-defined program.

• 

Program Defined - The cutting parameters will be 

generated automatically based on the type of material 

and material thickness entered in the tab PROCESS 

SETUP.

• 

User Defined - You can enter the cutting parameters 

manually based on the cut charts provided in the 

FLEXCUT

TM

 125 CE 

or 

TOMAHAWK

®

 1538

 manual.

Sample Voltage is an On/Off switch

.

• 

On (with MODE: AUTO):

 At the beginning of the 

cut, the controller learns the proper Arc Voltage and 

maintains the desired Cut Height value entered in 

CUT PARAMETERS.

• 

Off (with MODE: AUTO): The AVHC will adjust based 

on the SET VOLTAGE and CURRENT VOLTAGE 

only. If the SET VOLTAGE is different from the 

CURRENT VOLTAGE, the tool holder will adjust its 

position to take account of the difference.

• 

On/Off (with AVHC MODE: MANUAL):

 This function is 

deactivated.

IHS MODE

 is the process used for detecting the material 

height and how it reacts between pierces.

•  Optimal: Optimal carries out an initial detection 

(ohmic) of the material and uses a parameter based 

on the material thickness to process another ohmic 

detection. As a result of this process, the head 

“does away with” ohmic detection up to that material 

thickness, based on this parameter.   

•  Always: The head detects the material via ohmic 

detection at each pierce

AVHC and Dashboard:

Summary of Contents for LINC-CUT AS-CM-LCS1020WF125







































































Reviews:

No comments