manualshive.com logo in svg

Lincoln Electric LINC-CUT AS-CM-LCS1020WF125, Instruction Manual, Page: 10 / 70

Share
Download
Lincoln Electric LINC-CUT AS-CM-LCS1020WF125 Instruction Manual Download Page 10

LINC-CUT

®

 S 1020w-1530w

6

The equipment for 

LINC-CUT

®

 S 1020w-1530w

 supplied by 

Lincoln Electric

®

 is designed and manufactured 

to ensure safety. However, you can heighten the overall safety of your machine by installing it correctly and 

using it wisely.

WARNING

MAKE SURE YOU DO NOT INSTALL, USE OR REPAIR THE EQUIPMENT WITHOUT FIRST READING 

THE SAFETY INSTRUCTIONS IN THIS MANUAL. Think before you act, and be cautious.

Safety first

Airborne noise:

Refer to the dedicated manual (no 86957050) supplied with the equipment.

General safety instructions:

Read and understand the general safety instructions in the dedicated manual (no 86957050) 

supplied with the equipment.

Particular safety instructions:

Protect yourself and others from the risk of serious injury or death.

Keep children away

.

If you use a pacemaker, please seek the advice of your physician before using the machine.

Make sure that all installation, operation, maintenance and repair procedures are carried out 

by qualified personnel only

.

Handling conditions

For installation or maintenance operations, the operator must use an appropriate lift truck and 

lift the 

LINC-CUT

®

 S 1020w-1530w

 from the side opposite the cable drag chain.

Stability

The machine must be adjusted via its levelling feet so that it is stable.

“

No climbing

 on the structure of the machine other than on platforms or gangways designed 

for that purpose.

To access equipment at heights, the user must use accessing means in accordance with the 

regulations, such as a safe mobile gangway, an aerial lift etc.

Clean the working area from time to time.

Summary of Contents for LINC-CUT AS-CM-LCS1020WF125







































































Reviews:

No comments