Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 77 / 185

6. Lightware Device Controller (LDC) series – Extender Application Mode – User's Manual 77 6. Lightware Device Controller (LDC) series – Extender Application Mode – User's Manual 77
EXTENDER APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
6.5.7. Scaler Panel - Output Side (RX/TRX Modes)
Clicking on the Scaler panel on the HDMI output 1 of the receiver/transceiver opens the Scaler properties.
This feature allows to rescale the incoming stream to other resolution and refresh rate and fit to the sink
device. #scaler #csc #colorspace #colorrange
The most important signal and display information and settings are available on the panel.
Scaler panel for the HDMI out 1 (RX)
Available settings and tools:
▪
Scaling mode
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value in the forced resolution option will be
applied on the video signal;
– EDID based: the scaler forces the resolution which is read out from the EDID of the connected sink
device.
▪
Forced resolution
: list of the available resolutions with refresh rate values. The selected one will be
applied on the video signal. See the available resolution in the Resolutions of the Scaler / FRC section.
▪
Image position
(Stretch / Fit / Center)
▪
Color space conversion
(No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
▪
Color range
(No conversion / Full range / Limited range);
▪
No Sync Screen (Test Pattern) settings;
▪
Signal freeze button
: the signal freezes at the last video frame on the sink device (the sink may show a
broken frame either). #freeze
▪
Reloading factory default settings
for the selected port.
6.5.8. FRC - Output Side (RX Mode)
Clicking on the FRC (Frame Rate Converter) panel on the HDMI output 2 of the receiver opens the properties
of the Frame rate converter. #frc #csc #colorspace #colorrange
FRC panel for the HDMI out 2 (RX)
Available settings and tools:
▪
Output resolution mode
– Passthrough: the FRC is in pass-through mode.
– Forced resolution: the FRC is active, the selected value in the forced resolution option will be
applied on the video signal;
– EDID based: the FRC forces the resolution which is read out from the EDID of the connected sink
device.
▪
Forced resolution
: list of the available resolutions with refresh rate values. The selected one will be
applied on the display device. See the available resolution in the Resolutions of the Scaler / FRC
section.
▪
Color space conversion
(No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
▪
Color range
(No conversion / Full range / Limited range);
▪ No Sync Screen (Test Pattern) settings;
▪
Signal freeze button
: the signal freezes at the last video frame on the sink device (the sink may show a
broken frame either). #freeze
▪
Reloading factory default settings
for the selected port.

  

  