Lightware UBEX-PRO20-HDMI-F100 User Manual Download Page 10

Page: 10 / 185

1. Introduction

series – Extender Application Mode – User's Manual

1. Introduction

series – Extender Application Mode – User's Manual

EXTENDER APPLIC

TION MODE

Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3

1.1. Description

Lightware’s one of the most visionary development project is

the UBEX (Ultra Bandwidth Extender) product family. UBEX

is a fiber-optical, scaling AV-Over-IP system which allows

uncompressed 4K UHD@60Hz 4:4:4 signal extension with latency-free multistreaming, designed to use in

a 10G Ethernet network. UBEX operates with zero frame latency, provides seamless switching and lossless

reproduction of source signals of up to 4K60Hz 4:4:4, without artifacts. Uncompressed 4K60Hz 4:4:4 data

transmission, or visually lossless compression at higher data rates.

It has standard, 10 Gbps SFP+ optical modules installed, which are field exchangeable by the user. UBEX can

transfer two video signals over a single 10G link with minimal compression, which requires half the router

size compared to the needs of similar, 10G IP based architectures. With a 20G configuration, UBEX can

transfer 4K@60Hz 4:4:4 over two links uncompressed. The maximum reachable distance is ranging between

400 m and 80 km, depending on the type of singlemode or multimode SFP+ optical modules installed in the

device. The UBEX design also favors dual-screen applicationsas a single UBEX device can handle 2x HDMI

2.0 video ports. For video signals which can be transferred within the 10G speed limit of a single optical fiber,

a video signal redundancy feature is available employing the second optical fiber channel.

The Video Wall Wizard for UBEX features quick video wall installation with bezel adjustment and cropping,

includes options for various layouts within the video wall matrix and also allows zones for smart management.

The R-type UBEX product variant is specifically designed to withstand the daily wear and tear impacts

of dynamic, Rental&Staging type of applications. The devices shares the features of the standard

UBEX–PRO20–HDMI–F100 model, with additional features and changes in build and dimensions.

The internal power source of UBEX has Medical (60601) and ITE (60950) grade classifications for maximum

reliability.

Model Denomination

UBEX-PRO20-HDMI-F110

Ultra Bandwidth Extender

HDMI interface Model number

20 Gbit/s signal transmission

Fiber (SFP+) interface

ProLine product category

UBEX-PRO20-HDMI-R100 2xMM-QUAD

Ultra

Bandwidth

Extender

Neutrik

opticalCON

QUAD connector

HDMI interface Model number

20 Gbit/s signal transmission

R-series model

2x10G multimode

fiber optical

interface

ProLine product

Summary of Contents for UBEX-PRO20-HDMI-F100


























































































































































































Search results

Summary of Contents for UBEX-PRO20-HDMI-F100

Reviews:

Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 10 / 185

Search results

Summary of Contents for UBEX-PRO20-HDMI-F100

Reviews: