6. Lightware Device Controller (LDC)
series – Extender Application Mode – User's Manual
73
6. Lightware Device Controller (LDC)
series – Extender Application Mode – User's Manual
73
EXTENDER APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
6.4.2. Transceiver-Transceiver Pair
Video crosspoint menu - TRX-TRX pair in Extender mode
The Concept
The concept of the crosspoint menu in the case of a transceiver-transceiver pair is similar than the
transmitter-receiver pair. The GUI displays the UBEX
Transceiver #1
(left side) and the
Transceiver #2
(in the
middle) connected to each other. Clicking on a port or feature panel the
Properties
of the selected item
appears on the right side.
Streams
Each transceiver transmits one HDMI signal (up to 4K60 4:4:4 30 bit) to the remote device and receives one
HDMI signal (up to 4K60 4:4:4 30 bit) from the remote device. The name of both streams are Stream #1, but
the Stream tile displays the IP address of the source device for the easier identification.
See the legend of the tiles in the
Stream Switcher / Stream Tiles
INFO:
Thanks to the 20G full-duplex SFP+ interface the transceiver has no bandwidth limitation on the
input and output sides either. The device is able to receive and transmit 2x 4K60 Hz 4:4:4 24bit streams
on both HDMI ports.
Properties Windows
The details of the properties, available settings, and status information of the selected panels are available
in the
Properties Windows - Video Layer
section.
Clicking on the
icon the properties section opens in new window.
6.4.3. Port Tiles
The port tiles and the colors of the displayed icons represent different states and information.
1
Port name
2
Input / output port type indicator
HDMI input port
Local HDMI output port
HDMI output port (the signal
source is one of the input
streams)
HDMI output port (the signal
source is the copy of the
HDMI out 1)
Analog audio input port
Analog audio output port
3
Selected port indicator
If the frame is orange, the properties panel of
the port is displayed.
4
Port ID
5
Signal present indicator
If turquoise, signal is present, if grey, signal
is not present.
6
Resolution / refresh rate of the stream
7
Bandwidth of the stream
8
Embedded audio presence
Embedded audio is present.
Embedded audio is not present.
9
HDCP state
2.2
The signal is encrypted with
HDCP 2.2.
1.4
The signal is encrypted with
HDCP 1.4.
The sink device is not
compatible with the current
HDCP version.
Signal is not HDCP-encrypted.
q
+5V / Hotplug state
Source/sink is connected.
Source/sink is not connected.
w
Source multiplexer (MUX) selector
The selected source is the
Stream (coming from the
SFP+ ports).
The selected source is the
local HDMI input port.
The selected source is the
copy of the HDMI out 1 port.
Selectable source signal
e
Source multiplexer (MUX) expandable
menu
Clicking here results opening the MUX menu
with the selectable source signals of the
output port. See more details about this
function in the
section.