manualshive.com logo in svg

Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 39 / 185

Share
Download
Lightware UBEX-PRO20-HDMI-F100 User Manual Download Page 39

 

4. Installation 

series – Extender Application Mode – User's Manual 

39

 

4. Installation 

series – Extender Application Mode – User's Manual 

39

EXTENDER  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3

4.4.3. F-series Endpoints - Transceiver Operation Mode

Connections for the F110 model in transceiver operation mode

Changing the Operation Mode

The operation mode of the UBEX endpoint device can be changed using the following methods:

 

▪

via 

front panel LCD menu

 - see the details in the 

Operation Mode

 section;

 

▪

via 

Lightware Device Controller (LDC) software

 - see the details in the 

Status Tab

 section;

 

▪

via 

LW3 protocol command

 - see the details in the 

Set the Operation Mode

 section.

For all F-series models

OPT

DAC

Connect singlemode or multimode (depends on the installed SFP+ modules) 

fiber optical cables or DAC cables between the two UBEX endpoint devices. The 

Extender Mode is detected and applied automatically in the device once the 

connection is established successfully.

HDMI in

Connect the transceiver and the source device (e.g. PC) using the HDMI input 2 

port by an HDMI cable.

HDMI out

Connect a sink device (e.g. monitor) to the HDMI output 1 port by an HDMI 

cable.

Local HDMI out

Connect a local sink device (e.g. 4K TV) to the HDMI output 2 port by an HDMI 

cable. The port transmit the original stream of the HDMI in 2 port.

Ethernet

Optionally connect the transceiver to a LAN in order to control the device.

Power

Connect the power adaptor to the AC input on the transceiver first, then to the 

AC power socket.

For F110 model only

Audio in

Connect an audio source (e.g. media player) to the audio input connector.

Audio out

Connect an audio sink device (e.g. audio amplifier) to the audio output connector.

IR in

Connect an Infrared detector unit to the IR IN connector for receiving Infrared 

input signal.

IR out

Connect an Infrared emitter unit to the IR OUT connector for controlling third-

party devices over Infrared signal.

RS-232

Optionally for RS-232 extension: connect the controlled unit (e.g. 4K TV) to the 

RS-232 port of the device with a serial cable.

WARNING! 

User Ethernet is also transmitted over the SFP+ interface so be sure not to create network 

loop.

INFO: 

The HDMI input 1 port cannot accept AV signal when the device is configured as transceiver.

 

 

Summary of Contents for UBEX-PRO20-HDMI-F100


























































































































































































Reviews:

No comments