manualshive.com logo in svg

Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 173 / 185

Share
Download
Lightware UBEX-PRO20-HDMI-F100 User Manual Download Page 173

 

12. Appendix 

series – Extender Application Mode – User's Manual 

173

 

12. Appendix 

series – Extender Application Mode – User's Manual 

173

EXTENDER  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3

Bugfix:

 

▪ SCDC registers are only modified, if the connected display supports this protocol.

 

▪ 4k60 resolution was not transmitted to displays, which were 4k60 capable, but did not report SCDC 

capability in EDID, such as LG27UD58. Fixed.

 

▪

Fixed video tearing when converting between 60 and 24 Hz

 

▪

Fixed a glitch with EDID caching

 

▪

Fixed a glitch with HDMI outputs after operation mode change (TX/RX/TRX)

 

▪

Fixed a glitch with TMDS clocks between 310 and 340 MHz (e.g. 3440x1440p60)

 

▪

Fixed artifacts with video wall at 4K60

 

▪

Fixed HDMI audio node 'Connected' state

 

▪

Improved support for newer SFP+ standards (OM3/OM4 and copper lengths)

 

▪

Fixed a glitch that could cause an additional delay of one frame

v1.4.2b4

Release date: 2020-01-30

New feature:

 

▪

Added option to force HDCP 2.2 Type 1 Content on outputs

Bugfix:

 

▪

Fixed glitches with settings storage and factory defaults restoration

 

▪

Improved support for updating devices that are already in service mode

v1.4.1b2

Release date: 2019-12-03

Bugfix:

 

▪ Fixed a glitch with input scaler configuration storage

 

▪

Optimized runtime memory usage

v1.4.0b4

Release date: 2019-11-27

New feature:

 

▪

Added check to refuse downgrading to earlier versions

Bugfix:

 

▪

Added file system in order to cope with bad NAND flash blocks

 

▪

Improved stability for multicast update

v1.3.2b2

Release date: 2019-08-14

New feature:

 

▪

Fixed issues with using the 10.0.0.0/8 IP range for control

v1.3.1b5

Release date: 2019-07-02

New feature:

 

▪

Added support for No Sync Screen generation on TX/TRX sources (for network diagnostics)

 

▪

Added support for LDC Orientation Preference setting

 

▪

Improved LLDP support (reporting operation mode and package version)

 

▪

Added identify() method to S and O nodes

 

▪

Fixed channel status data for analog audio inputs

 

▪

Refined fan control (silent operation)

 

▪

Added support for R100 part numbers

 

▪

Added support for IR in F110

 

▪

Added support for centralized firmware update

Bugfix:

 

▪

Fixed a glitch with some 10G switches not switching streams automatically

Known issue:

 

▪

Video output is unstable when scaling a pre-cropped image to 4K@60

v1.3.0b10

Release date: 2019-05-03

New feature:

 

▪

Added support for Transceiver mode

 

▪

Added support for scaling to the default resolution of the attached display (EDID-based scaling)

 

▪

Added support for F110 variant (analog audio in/out, RS-232)

 

▪

Added support for upgrading endpoints in matrix mode with LDU2

 

 

Summary of Contents for UBEX-PRO20-HDMI-F100


























































































































































































Reviews:

No comments