manualshive.com logo in svg

Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 139 / 185

Share
Download
Lightware UBEX-PRO20-HDMI-F100 User Manual Download Page 139

 

8. Firmware Update 

series – Extender Application Mode – User's Manual 

139

 

8. Firmware Update 

series – Extender Application Mode – User's Manual 

139

EXTENDER  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3

Update Steps

Step 1. 

Select the firmware package.

Click on the 

Select Firmware Package

 button and navigate to the location where the LFP2 file of the UBEX 

endpoint is saved. When you click on the name of package, the preview of the release notes are displayed on 

the right side.

Firmware file browser and the release notes window

After the package file is loaded, the list is filtered to show compatible devices only. The current firmware 

version of the device is highlighted in orange if it is different from the version of the package loaded.

Filtered device list based on the selected firmware package

Step 2. 

Select the remote unit first for updating.

Pick the remote device for updating. The selected line will be highlighted in green.

The remote unit is selected for updating

TIPS AND TRICKS: 

If you are not sure which device is connected to your controller device directly, use 

the 

Identify me

 feature clicking on the 

 button. It makes the four front panel LEDs blink in green for 10 

seconds. The feature helps to identify the device itself in the rack shelf or on the desk.

 

 

Summary of Contents for UBEX-PRO20-HDMI-F100


























































































































































































Reviews:

No comments