LightPointe FlightLite 100, Installation And Maintenance Manual

Page: 30 / 59

FlightTransport Installation Guide
2-16 505-016300-00000 Rev A
2.7. Install the Power Over Ethernet Injector
(This is an Optional arrangement – System may also be powered using
a LightPointe standard power supply at the linkhead)
If the Power Over Ethernet PSE adaptor is to be used:
Step 1
Connect the DC power adaptor to the injector and plug the
adaptor into the commercial AC wall socket.
POE Injector components and interconnections
Step 2
Connect the Injector’s built-in RJ-45 Cat 5 Ethernet cable to
your network.
Step 3
Connect the RJ-45 Cat 5 Ethernet cable from the Linkhead
to the POWER AND DATA OUT RJ-45 jack on the injector.
Router/Mux/Switch
POE Power
Inserter
(Indoor)
Category 5 UTP
100 – 240VAC
POE Injector
CAT 5 Cable
CAT 5 Cable
to FL 100
to Network