LightPointe FlightLite 100, Installation And Maintenance Manual

Page: 38 / 59

FlightTransport Installation Guide
2-24 505-016300-00000 Rev A
2.9. Link Head Alignment
The following are the alignment procedures for the FL 100.
Receive Lens Transmit Lens
Low Receive
Power Indicators
Alignment
Telescope
Front Pane
Heating
Element
Figure 2-12: Front of Link Head showing operational features
2.9.1. Alignment Procedure
A single person will have much difficulty in performing link head
alignment. Two people are virtually mandatory. The only tools required
to perform system alignment are the Allen wrenches (metric #6) that
are provided with the system.
Perform the following steps moving only one linkhead at a time:
Step 1
Remove the back cover protective plate from the link head
and the lens covers from the telescopes.
Step 2
Loosen the locking screws at both pan and tilt assembly.
Adjust the pan and tilt locking screws so that smooth,
controlled movement is possible for fine alignment.