FlightTransport Installation Guide
2-14
505-016300-00000 Rev A
Caution:
The base plate and head plate should be pinned
to the mounting post when the base plate is
mounted in a horizontal position. Do this to
prevent rotation and misalignment from wind.
Extra
security
for
Horizontal
mounting
situations
To pin the base plate and head plate to the mounting post
when used in a horizontal mount:
Drill an 8 mm hole through the cylinder wall of the base plate and the
mounting post and pin the assemblies together using 8 mm grooved
pins or 3/8 x 1 inch screws.
Drill an 8 mm hole through the cylinder wall of the head plate and the
mounting post and pin the assemblies together using 8 mm grooved
compression fit pins or 3/8 x 1 inch stainless steel screws.
Position the pins at the opposite side of the cap and base from the
tensioning screws. This will assure that the mount does not rotate and
cause system misalignment.
Drill and pin cap to
pole to prevent
rotation
Drill and pin base to
pole to prevent
rotation
Summary of Contents for FlightLite 100
