LightPointe FlightLite 100, Installation And Maintenance Manual

Page: 18 / 59

FlightTransport Installation Guide
2-4 505-016300-00000 Rev A
2.1.5. Power Over Ethernet Powering Method
The FPW PSE FL100 Power Over Ethernet injector consists of the
following components:
Figure 2-5: Power Over Ethernet Power Supply components
The Power Injector is equipped with a powered and a non-powered RJ
Port. Use the Non-Powered port to connect data into the Network
Equipment, hub, switch or router. The Injector is plugged into
commercial AC. The Injector places power over up to 100 meters of
Cat 5/6 Unshielded Twisted Pair wiring to power the linkhead from the
powered RJ Port.
2.1.6. Local AC Power Supply at linkhead
A weatherproof outdoor local power supply may be provisioned at the
linkhead mounting location in place of the POE injector:
INPUT OUTPUT
Indicator Lamps for
Input and Output
Voltage
Primary Fuse 0,8 A
Output 1 Output 2
Input
Selector switch
110/230V
Secondary Fuse 4 A
Figure 2-6: FlightLite100 (LPL-A12) Power Supply Assembly
Category 5 UTP
100 – 240VAC
Power Cord
POE Power
Injector
DC Cord