Lighthouse solair 3100, Operating Manual

Page: 131 / 188

Operating Counter
248083389-1 Rev 6-65
• When the reports mode is enabled, the currently selected report
type and minimum required samples will be displayed on the
MAIN screen as shown in Figure 6-81.
Figure 6-81 Reports Data
• The instrument keeps track of and will display on the MAIN screen
the number of samples taken for the report.
• If Auto Increment is enabled, the user will be prompted to move the
particle counter to the next assigned location after the completed
number of cycles.
• If Printing is enabled and Auto Increment is enabled, the report will
be printed after the required number of samples are completed.
• After the required number of samples have been completed, the
instrument will prompt the user to disable Reports Mode as shown
in Figure 6-82.
Figure 6-82 Disable Reports Prompt