Lighthouse solair 3100, Operating Manual

Page: 29 / 188

Unpacking, Inspecting and Installing
248083389-1 Rev 3-7
Connecting Isokinetic Probe
The SOLAIR 3100/5100 comes with an isokinetic sample probe and a
tripod stand. The shipment includes 10 feet of sample tubing that is
lined with a material that reduces electrostatic attraction and particle
adhesion. It will fit over the sample inlet.
1. Attach one end of the tubing onto the barb connector of the
isokinetic probe and attach the probe to the tripod.
Figure 3-5 Preparing Isokinetic Probe for Use
Note:
Replace the
protective cap on the
sample inlet when the
sample tubing is removed.
2. Remove the protective cap from the sample inlet located on top of
the unit and attach the other end of the sample tubing to the inlet
port. Push gently until the end of the tubing covers the entire inlet.
Figure 3-6 Attaching tubing to Inlet