Lighthouse REMOTE 3104P, Operating Manual

Page: 29 / 82

Getting Started
248083336-1 Rev 3 3-11
DIP Switches
DIP switches 1-6 are used for addressing the instrument for RS-485
daisy chain configurations and setting the Communications Mode.
DIP switch 7 enables or disables the Remote LCD Display option. See
Chapter 4 for more details.
Power
This REMOTE instrument uses 100-240 VAC rated at 130W.
Power Switch
The ON/OFF switch controls power to the instrument.
Optional Analog Input Ports
Two input ports are provided for connecting 4-20mA analog sensors.
Remote Display Connector
Note:
Make sure DIP
switch 7 is ON and power
is OFF before attaching the
REMOTE Display to the
3104P or 5104P.
The optional Remote Display color touchscreen may be connected to
the 3104P or 5104P instrument to provide direct control over the unit.
An optional extension cable can be added so that the instrument can be
running in a clean area while the Display is located in a different area.
Refer to REMOTE Display Operating Manual for more details.
Refer to the photo to the left and note the orientation of the ’key’. If
you are installing a REMOTE Display, pay close attention to this
keying and do not force the connector or irreparable damage will result
and void the instrument’s warranty.
Key orientation