Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 85

Page: 85 / 144

-85-

v8.6

Models

Sensor sockets are configured as shown in the figure below.

Sensor

Socket

Sensor probes allowed for each sensor socket

Parameter

Reference

Weather Station WS-3000 (anem wind vane + pluviometer) 9256-P

Soil Moisture 1

9248-P, 9324-P, 9323-P

Solar Radiation (PAR)

9251-P

Ultraviolet Radiation

9257-P

Soil Moisture 3

9248-P, 9324-P, 9323-P

Dendrometers

9252-P, 9253-P, 9254-P

D (digital

bus)

Soil Temperature (Pt-1000)

9255-P

Tempe Hu Pressure

9370-P

Luminosity (Luxes accuracy)

9325-P

Ultrasound (distance measurement)

9246-P

Leaf Wetness

9249-P

Soil Moisture 2

9248-P, 9324-P, 9323-P

F (digital

bus)

Tempe Hu Pressure

9370-P

Luminosity (Luxes accuracy)

9325-P

Ultrasound (distance measurement)

9246-P

Figure: Sensor sockets configuration for Smart Agriculture PRO model

* Ask Libelium

Sales Department

for more information.

Note:

For more technical information about each sensor probe go to the

Development section

on the Libelium

website.

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Search results

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

Reviews:

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 85 / 144

Search results

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

Reviews: