manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 43 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 43

-43-

v8.6

Radio modules

 

•

America: 

 

-

Class E2 (0.5 W, 27 dBm) @ EDGE 900

 

-

Class E2 (0.4 W, 26 dBm) @ EDGE 1800

 

-

Class 3 (0.25 W, 24 dBm) @ UMTS

 

-

Class 3 (0.2 W, 23 dBm) @ LTE

Antenna connector: 

 

•

U.FL for main antenna

 

•

U.FL for cellular diversity antenna

 

•

U.FL for GPS antenna (only for the Europe/Brazil module)

External antenna: 

+5 dBi

GPS: 

GPS feature is supported only in the Europe/Brazil version

This module can carry out the following tasks: 

 

•

Sending/Receiving SMS 

 

•

Multisocket up to 6 TCP/IP and UDP/IP clients

 

•

TCP/IP server

 

•

TCP SSL

 

•

HTTP service

 

•

FTP service (downloading and uploading files)

 

•

Sending/receiving email (SMTP/POP3)

Certifications: 

 

•

LE910-EUG (Europe / Brazil): CE, GCF, ANATEL

 

•

LE910-NAG (US / Canada): FCC, IC, PTCRB, AT&T approved

 

•

LE910-SKG (South Korea): KCC, SK Telecom approved

 

•

LE910-JN V2 / LE910-JK V2 (Japan): NTT DoCoMo, KDDi

This model uses the UART1 at a baudrate of 115200 bps to communicate with the microcontroller. 

Related API libraries: 

Wasp4G.h, Wasp4G.cpp

All information about programming and operation can be found in the 

4G Networking Guide

. 

All the documentation is located in the 

Development section

 of Libelium website. 

Note:

 

A rechargeable battery must be always connected when using this module (USB power supply is not enough).

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments