manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 134 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 134

-134-

v8.6

Documentation changelog

From v7.4 to v7.5

 

•

Changed description of the new External SIM/USB Socket version, now nano-SIM compliant

 

•

Changed specifications of the SD card, now 8 GB

 

•

Deleted references to the discontinued Internal Solar Panel

From v7.3 to v7.4

 

•

Added Programming Cloud Service section

From v7.2 to v7.3

 

•

Added External Battery Module section

 

•

Operating temperature range was updated

 

•

Added notes about recharging the 6600 mA·h battery 

From v7.1 to v7.2:

 

•

Added references to the new GPS accessory for Plug & Sense!

 

•

Added references to the discontinuation of Smart Environment

 

•

Added references to the new sensors for Smart Environment PRO

 

•

Deleted references to non-rechargeable batteries

From v7.0 to v7.1:

 

•

Added references to the integration of Industrial Protocols for Plug & Sense!

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments