manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 58 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 58

-58-

v8.6

External solar panel

15. External solar panel

This panel should be connected to the external solar panel connector. As shown in picture below, it has identical 

shape as sensor connectors, but is placed on the control side of the enclosure, below the on/off button.

External solar panel features:

 

•

Max power:

 3 W

 

•

Max power voltage:

 5.8 V

 

•

Max power current:

 520 mA (max current input is 300 mA in Plug & Sense!)

 

•

Dimensions:

 234 x 160 x 17 mm

 

•

Weight:

 0.54 kg

Figure: External solar panel connector

Do not connect any sensor on this connector and also do not connect the solar panel to a sensor connector. 

Waspmote can be damaged and warranty will be void.

         

          

Figure: Connecting the solar panel to Waspmote Plug & Sense!

In the next picture a typical installation with external solar panel is shown. Notice that the enclosure is placed just 

under the solar panel, using it as a protection against sun and rain.

Libelium provides special brackets in order to install it correctly.

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments