manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 126 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 126

-126-

v8.6

Installation

29.3. Wall installation

Another typical installation of Waspmote Plug & Sense! is on walls. Using the mounting feet accessory, the node 

can be tied using provided screws and wall plugs. Next pictures show examples of typical installation processes 

using the external solar panel in combination with provided accessories.

29.3.1. External solar panel

Step 1: Secure the solar panel bracket to the external solar panel

Use provided screws to secure the solar panel bracket to the external solar panel. Be sure you place screws in the 

right bracket holes, as shown in previous section.

Step 2: Secure Waspmote Plug & Sense! to the wall.

Use provided screws and wall plugs to secure firmly the node to the wall. Check if the node remains completely 

fixed to avoid it could fall dow

n.

Figure: Waspmote Plug & Sense! placed on a wall

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments