manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 50 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 50

-50-

v8.6

Resetting Waspmote Plug & Sense! with an external magnet

13. Resetting Waspmote Plug & Sense! with an external 

magnet

Waspmote Plug & Sense! can be reset with an external magnet, with no contact. If one node stops working or if a 

defective behavior is detected, it would be costly to uninstall the node to bring it back to laboratory. This feature 

allows the network manager to reset the node in a quick and easy way. 

The hardware consists of a reed switch connected to the Waspmote reset line. When the user gets the magnet 

close to the reed-switch, the reset is activated. When the user moves the magnet away, the reset line is released 

(the external LED will blink) and Waspmote executes the bootloader first and then, the setup function. After the 

setup, it will continue with the loop function. Next pictures show the right way to reset the node using an external 

magnet, first moving it closer, and then moving it away.

Figure: Moving the magnet closer to the node

Figure: Moving the magnet away from the node

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments