manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 44 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 44

-44-

v8.6

Industrial Protocols

9. Industrial Protocols

As an optional feature, it is possible to incorporate an Industrial Protocol module as a secondary communication 

module, besides the main radio interface of Waspmote Plug & Sense!. 

The available Industrial Protocols are RS-485, CAN Bus and Modbus (software layer over RS-485). This optional 

feature is accessible through an additional and dedicated socket on the antenna side of the enclosure.

Figure: Industrial Protocols available on Plug & Sense!

The user can choose between 2 probes to connect the desired Industrial Protocol: A standard DB9 connector and 

a waterproof terminal block junction box. These options make the connections on industrial environments or 

outdoor applications easier.

Figure: DB9 probe connected to Plug & Sense!

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments