manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 46 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 46

-46-

v8.6

GPS module

10. GPS module

Any Plug & Sense! node can incorporate a GPS receiver in order to implement real-time asset tracking applications. 

The user can also take advantage of this accessory to geolocate data on a map. An external, waterproof antenna 

is provided; its long cable enables better installation for maximum satellite visibility.

Figure: Plug & Sense! node with GPS receiver

Chipset:

 JN3 (Telit)

Sensitivity: 

 

•

Acquisition: -147 dBm

 

•

Navigation: -160 dBm

 

•

Tracking: -163 dBm

Hot start time:

 <1 s

Cold start time:

 <35 s

Positional accuracy error

 < 2.5 m

Speed accuracy

 < 0.01 m/s

EGNOS, WAAS, GAGAN and MSAS capability

Antenna: 

 

•

Cable length: 2 m

 

•

Connector: SMA

 

•

Gain: 26 dBi (active)

Available information:

 latitude, longitude, altitude, speed, direction, date&time and ephemeris management

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments