manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 56 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 56

-56-

v8.6

USB port

The nano-SIM card connector allows the user to connect the SIM card he likes from the outside. It is not necessary 

to send a SIM card to Libelium for proper installation. You can ask your telecommunication provider for a nano-

SIM card. Alternatively you can take a normal SIM card and transform it into a nano-SIM card with a SIM card 

cutter.

Besides, the nano-SIM card connector has a push-push mechanism, so it is really easy to remove the card with 

the aid of one nail. 

     

Figure: Push-push mechanism in the External SIM/USB socket

Please mind the correct orientation of the nano-SIM card: the side of the chip must look towards the micro-USB 

connector, and the 45º-angled corner must face the device.

Figure: Correct orientation of the nano-SIM card

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments