manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 101 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 101

-101-

v8.6

Uploading code

Step 6: Select the corresponding code

Go to the examples menu and open your desired example. Then modify it according to your application and save 

the sketch with the save button, for instance with the name “Waspmote_Plug_Sense_test_code”, and check the IDE 

message “Done Saving”.

Save the sketch (Waspmote IDE has a button for that), for example with the name “Waspmote_Plug_Sense_

test_code”, and check the IDE message “Done Saving”.

Figure:  Preparing code for Waspmote Plug & Sense!

Step 7: Select the corresponding API

Select the latest API version going to tools/board. There can be only one API in each installed IDE. Please read the 

“IDE: User Manual” for more details.

Figure: Selecting API

Please notice that Waspmote “OEM” and Plug & Sense! share the same API and IDE. The same software system is 

valid for both platforms.

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments