manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 49 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 49

-49-

v8.6

On/off button

12.1. External LED

The on/off button includes a red ring LED, which can be managed by software using dedicated functions described 

below. This LED can be used for instance to know that Waspmote is on, or for debugging purposes at developing 

phase. By default, Waspmote Plug & Sense! comes with a code that blinks briefly (3 times in less than one second) 

this LED when it is turned on. The LED can be managed specifying on time or just setting this state with specific 

API functions. The user should take into account that the usage of this LED will increase power consumption due 

to external LED consumes 4.4 mA.

Figure: Waspmote turned on

External LED ring can be managed with next code lines:

Utils.setExternalLED(LED_ON); // Turns external led ON

Utils.setExternalLED(LED_OFF); // Turns external led OFF

There is also another useful function which blinks external LED during specified time.

Utils.externalLEDBlink(uint_16 time) // Time must be in seconds

Finally, there is an extra function to know the external LED state:

Utils.getExternalLED(); // Read external led state

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments