LI-COR AirLink RV50X, Instruction Manual

Page: 45 / 90

For the Biomet Data Acquisition System
If the system includes a LI-COR Biomet Data Acquisition System, you do not need
to open ports in order to log data. However, to enable two-way communication (to
update the biomet system configuration remotely, for example) or to use the
SmartFlux 2 or 3 System as an NTP server, you must also open three ports. Port for-
warding settings apply to the SmartFlux that the Biomet Data Acquisition System is
connected to. The IP address associated with the ports is different for SmartFlux 2
(see
Table 4-2 below) and SmartFlux 3 Systems (see Table 4-3 on the next page).
Click
Add More
to add three more ports as shown in the applicable table. If you
have the SmartFlux 2 System, also see Setting the SmartFlux 2 System IP address via
the RV50X on page 4-11.
Public Start
Port Public End
Port
Protocol Host IP (SmartFlux 2)
Private Start
Port
7200 0 TCP 192.168.13.201 7200
7222 0 TCP 192.168.13.201 22
7700 0 TCP 192.168.13.202 7700
50111 0 TCP 192.168.13.200 50111
50112 0 TCP 192.168.13.200 50112
50311 0 TCP 192.168.13.200 50311
Table 4-2 . Host IP addresses for the SmartFlux 2 System when using a Biomet Data
Acquisition System.
Section 4. Configuring the RV50X
4-9 For the Biomet Data Acquisition System