LI-COR AirLink RV50X, Instruction Manual

Page: 32 / 90

Section 3. Configuring instrument IP addresses
Setting the PhenoCam IP address
If your system includes a PhenoCam, set its IP address next.
1 Be sure the camera is powered on and the Ethernet cable is connected to the switch.
2 Launch the StarDot Tools application.
Download it from http://www.stardot.com/downloads and install it on your Win-
dows computer. Launch the app and it will present all of the PhenoCams that are
on your network. Identify the one you want to configure and record its ID and IP
address.
3 Enter the IP Address into a web browser address bar.
Upon connecting, the browser will display a recent image from the camera as well
as some menu links.
4
Click
Config
in the lower left of the page and log in when prompted.
l
User Name: admin
l
Password: admin
5 Click the
Network
tab and configure the settings:
A Under
IP Assignment
, select
Manual
.
B
Set the IP Address:
l
IP Address:
192.168.13.205
l
Subnet Mask:
Typically it should be 255.255.255.0
l
Gateway:
Set this to the IP address used to connect with the RV50X:
(192.168.13.31)
Reboot
the PhenoCam after changing the network settings.
3-4 AirLink Cellular Communication