LGMG SR1623, Operation And Maintenance Manual

Page: 81 / 86

Lifting Work Platform Operation and Maintenance Manual
74
tobacco.
A qualified fire extinguisher shall be placed in an easily accessible place.
△
! Never fill the filter in advance. There is risk of contamination.
1) If a torsion stopper is installed, remove the clamping clamp (optional).
2) Release and unscrew the filter element with a wrench.
3) Contain the diesel fuel drained.
4) Clean the sealing surface of the filter holder with a clean fiber-free wiper.
5) Apply a thin layer of diesel to the seal ring of the new filter.
6) Screw in a new filter manually until seal fit and tighten it with
10-12 Nm.
Tighten the torque.
7) Fix the clamping clamp of a torsion stopper (optional).
8) Exhaust the fuel system.
11.22 Check for Engine Air Filter
Check the maintenance indicator for the air filter every 8 hours or
every day.
△
!
Perform this step when the engine is turned off.
Check the maintenance indicator of the air filter. When the transparency of the indicator turns red, filter
element needs to be maintained and cleaned or replaced.
11.23 Cleaning or Replacement of Air Filter
Clean it every 250 hours or a quarter.
△
!
Do not operate on running engines!
△
!
Be sure to pay attention to the cleanliness of the
external surface when operating on the engine suction
system, and close the suction inlet when necessary. The old
filter elements are handled in an environmentally friendly
manner.
Cleaning of air filter
△
!
Do not clean the filter element (3) with gasoline or high
temperature liquid, or replace the filter element .
1) Open the locating plate (1).
2) Remove the filter cover (2) and screw off the filter element (3).
3) Filter element (3): For slight contamination, purge with dry compressed air (maximum 5 bar) from
inside to outside for cleaning (general cleaning times are no more than 5 times);
Replace it in case of serious contamination.
Replacement of the Safety Filter Tube of the Air Filter
1 5
2
4
3