LGMG SR1623, Operation And Maintenance Manual

Page: 80 / 86

Lifting Work Platform Operation and Maintenance Manual
73
△
!
The engine must be shut down!
No smoking and open fires!
Be careful when contacting high temperature fuel!
Please observe the safety regulations for fuel and relevant local regulations. Dispose of spilled
fuel and filter elements in accordance with national regulations. The fuel cannot seep into the
ground.
Visually check for fuel leakage every 8 hours or every day .
△
!
There is danger of explosion and fire. The fuel of the engine is combustible. Check the
position of the machine. When this step is performed, the machine shall be away from the heater,
spark, flame, and open and well-ventilated areas with burning tobacco. A qualified fire
extinguisher shall be placed in an easily accessible place.
△
! There is danger of explosion and fire. If fuel leaks,
prevent any additional person from entering the area or
operating the equipment. Repair the leakage immediately.
11.21 Replacement of the Fuel Filter Element
△
!
The engine must be shut down!
No smoking and open fires!
Be careful when contacting high temperature fuel!
△
!
Do not release the injection pipeline or the high-pressure oil pipeline when the engine is
running.
△
!
Carefully clean all areas involved in cleaning. Blow wet parts with compressed air.
△
!
Please observe the safety regulations for fuel and relevant local regulations. Dispose of
spilled fuel and filter elements in accordance with national regulations. The fuel cannot seep into
the ground.
△
!
After completing the operation on the fuel system, exhaust the system, perform the trial
operation and check the seal performance.
It is available in the first 50 hours, and it will be replaced every 250
hours, or quarters, but an increase in the number of replacement
filters is required for the extremely dirty work environment.
△
! There is danger of explosion and fire. The fuel of the engine
is combustible. Check the position of the machine. Execution
When this step is performed, the machine shall be away from the
heater, spark, flame, and open and well-ventilated areas with burning