LGMG SR1623, Operation And Maintenance Manual

Page: 78 / 86

Lifting Work Platform Operation and Maintenance Manual
71
11.18 Check for Engine Oil Level
△
! Do not operate on running engines!
No smoking and open fires!
Be careful when contacting with high temperature engine oil. Danger of scalding!
△
!
When operating on the oil system, pay attention to the surface cleaning. Carefully clean all
areas involved. Blow wet parts with compressed air.
△
!
Please observe the safety regulations for engine oil and relevant local regulations. Dispose
of spilled engine oil and filter elements as required. Waste oil cannot penetrate into the ground.
△
! Test run shall be carried out after each operation. At the same time, pay attention to the
sealing and lubricating oil pressure, and then check the engine oil level.
Check the engine oil level every 8 hours or every day.
Insufficient or excessive engine oil may cause damage to the engine. The engine oil level can only be
checked when the engine is placed horizontally and closed. If the engine is hot, close the engine and
check the engine oil level 5 minutes later. Check it immediately if the engine is cooled.
1) Insert the oil measuring rod and clean it with a piece of clean and fiber-free cloth.
2) Insert the oil measuring rod into the bottom.
3) Pull out the oil measuring rod and read the value of engine oil level.
4) The engine oil level shall always be between MIN and MAX!
Fill up to the maximum liquid level if necessary.
11.19 Replacement of Engine Oil and Filter
△
! Do not operate on running engines!
No smoking and open fires!
Be careful when contacting with high temperature engine oil. Danger of scalding!
△
! When operating on the oil system, pay attention to the surface cleaning. Carefully clean all
areas involved.
Blow wet parts with compressed air.
△
! Please observe the safety regulations for engine oil and relevant local regulations. Dispose
of spilled engine oil and filter elements as required. Waste oil cannot penetrate into the ground.
△
!
Test run shall be carried out after each operation. At the same time, pay attention to the
sealing and lubrication oil pressure, and then check the engine oil level.