LGMG SR1623, Operation And Maintenance Manual

Page: 70 / 86

Lifting Work Platform Operation and Maintenance Manual
63
11.1 Compliance and Obedience
1) The operator is only allowed to perform routine maintenance items as specified in this manual.
2) Carry out periodic maintenance and check by trained maintenance technicians as required by the
manufacturer.
Maintenance Symbols
The following symbols are used in this manual to help convey relevant meanings in the instructions.
When one or more symbols are shown at the first part of the maintenance program, the meanings
expressed are as follows.
It indicates a tool required to carry out this procedure.
It indicates a new part required to carry out this procedure.
It indicates that the engine must be in a cooling state before carrying out this procedure.
11.2 Check for Safety Manual
It is required to keep the operator in a good state and the safety manual in proper condition for safe
operation. The manual and each device shall be stored in a container provided in the work platform. An
unrecognized or lost manual shall be unable to provide necessary safety and operation information for
safe operation.
1) Confirm that the storage container is on site and in a good condition.
2) Confirm both the responsibility manual and safety manual are in the storage container within the
work platform by the operator.
3) Check each page of the manual to be legible and in a good condition.
4) Put the manual into the file storage box after use.
△
! If the manual needs to be replaced, please contact the service staff of Lingong Group Jinan Heavy
Machinery Co., Ltd.
11.3 Check for Labels and Signs
It is required to keep all safety and description labels and signs in a good condition for safe operation of
the platform. Labels warn operators and staff of many possible hazards in using the platform. They also
provide users with operation and maintenance information. Illegible labels cannot warn staff of steps or
hazards and may lead to unsafe operating conditions.
Refer to the label section in this operation manual and use the label menu and instructions to check that
all labels are in place.
Check the clarity and damage of all the labels and immediately replace any damaged or illegible label.
If the labels need to be replaced, please contact the service staff of Lingong Group Jinan Heavy
Machinery Co., Ltd.
11.4 Check for Damaged, Loose or Missing Parts
This step is performed every 8 hours or every day.
Carrying out daily equipment status check is necessary for ensuring safe equipment operation and
maintaining good equipment performance. Incorrect positioning, repairing damaged equipment, and
loose or missing parts may result in unsafe operating conditions.